Did you know …….?
Nubeprint answers FAQS.
After many years of experience and customer interactions, there are a number of frequently asked questions (FAQ, Frequently Asked Questions) that are recurring, questions that do not depend so much on the size of the dealer or his experience in handling the Nubeprint system panel, but rather on the use of the various apps and the exact location of certain functionality. Do you want to know the answers to our FAQS…?
Today we are going to carry out an exercise to clarify doubts that usually arise in the use of our system. If you are a Nubeprint customer, you will be quite familiar with the control panel, with greater or less fluency in its use depending on the time you have been managing it. For this reason, the first answers we will give you to the FAQ’s below may seem obvious to you… Or not…?
1st Do I have to download the cpm executable every time I create a project?
No. Once you have downloaded the executable in a single project (Windows, the most common), this executable is generic, it is valid for all projects that need the same executable. We recommend loading it on a pen drive (with its label “Windows” in this case), pen drive that you will be able to use in all cpm installations where any client has the “Windows” system.
2nd. Why does it take so long for the system to find the machines in the first scan?
It depends on the search range configured in the cpm. If it is a client with few printers, you can include the IPs manually in the cpm configurator and the search will be much faster.
3rd. How do I remove a machine from the system?
In the Inventory app, click on “Show/Hide columns” and make sure to click on “Remove”. This column will appear on the right side of your panel and you will see that all the machines have a check mark: remove the check mark on as many machines as you want to remove and, in the next update, they will no longer appear (Important: when a machine is removed from the system, there is no possibility to recover it, you have to install the cpm again).
4th. Where can I modify or delete a project?
In the Settings app you can change the name of the project, activate/deactivate the notifications for consumables or technical alerts and, at the bottom, delete the project (Important: be sure to select the project you want to delete in the left column. If you select “All projects”, they will all disappear from your panel).
5th. Where can I change the consumables alert thresholds?
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.
6th. Where can I edit and write in the panel?
In all the apps where “***” appears in green in any column. When you click, you can write the new data (to modify it, you can rewrite over it; if you want to leave it empty again, rewrite “***”). A good example is the Inventory app: click on “Show/Hide columns” and select all the options you want to see in your panel. You will see that most of them have the “***” to edit and annotate what you want.
So much for the first set of answers. Nubeprint is currently developing an AI app that will allow you to chat in real time and ask all kinds of queries: the launch of NubAI is coming soon…..
Source: Nubeprint
1st Do I have to download the cpm executable every time I create a project?
No. Once you have downloaded the executable in a single project (Windows, the most common), this executable is generic, it is valid for all projects that need the same executable. We recommend loading it on a pen drive (with its label “Windows” in this case), pen drive that you will be able to use in all cpm installations where any client has the “Windows” system.
2nd. Why does it take so long for the system to find the machines in the first scan?
It depends on the search range configured in the cpm. If it is a client with few printers, you can include the IPs manually in the cpm configurator and the search will be much faster.
3rd. How do I remove a machine from the system?
In the Inventory app, click on “Show/Hide columns” and make sure to click on “Remove”. This column will appear on the right side of your panel and you will see that all the machines have a check mark: remove the check mark on as many machines as you want to remove and, in the next update, they will no longer appear (Important: when a machine is removed from the system, there is no possibility to recover it, you have to install the cpm again).
4th. Where can I modify or delete a project?
In the Settings app you can change the name of the project, activate/deactivate the notifications for consumables or technical alerts and, at the bottom, delete the project (Important: be sure to select the project you want to delete in the left column. If you select “All projects”, they will all disappear from your panel).
5th. Where can I change the consumables alert thresholds?
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.
6th. Where can I edit and write in the panel?
In all the apps where “***” appears in green in any column. When you click, you can write the new data (to modify it, you can rewrite over it; if you want to leave it empty again, rewrite “***”). A good example is the Inventory app: click on “Show/Hide columns” and select all the options you want to see in your panel. You will see that most of them have the “***” to edit and annotate what you want.
So much for the first set of answers. Nubeprint is currently developing an AI app that will allow you to chat in real time and ask all kinds of queries: the launch of NubAI is coming soon…..
Source: Nubeprint
2nd. Why does it take so long for the system to find the machines in the first scan?
It depends on the search range configured in the cpm. If it is a client with few printers, you can include the IPs manually in the cpm configurator and the search will be much faster.
3rd. How do I remove a machine from the system?
In the Inventory app, click on “Show/Hide columns” and make sure to click on “Remove”. This column will appear on the right side of your panel and you will see that all the machines have a check mark: remove the check mark on as many machines as you want to remove and, in the next update, they will no longer appear (Important: when a machine is removed from the system, there is no possibility to recover it, you have to install the cpm again).
4th. Where can I modify or delete a project?
In the Settings app you can change the name of the project, activate/deactivate the notifications for consumables or technical alerts and, at the bottom, delete the project (Important: be sure to select the project you want to delete in the left column. If you select “All projects”, they will all disappear from your panel).
5th. Where can I change the consumables alert thresholds?
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.
6th. Where can I edit and write in the panel?
In all the apps where “***” appears in green in any column. When you click, you can write the new data (to modify it, you can rewrite over it; if you want to leave it empty again, rewrite “***”). A good example is the Inventory app: click on “Show/Hide columns” and select all the options you want to see in your panel. You will see that most of them have the “***” to edit and annotate what you want.
So much for the first set of answers. Nubeprint is currently developing an AI app that will allow you to chat in real time and ask all kinds of queries: the launch of NubAI is coming soon…..
Source: Nubeprint
3rd. How do I remove a machine from the system?
In the Inventory app, click on “Show/Hide columns” and make sure to click on “Remove”. This column will appear on the right side of your panel and you will see that all the machines have a check mark: remove the check mark on as many machines as you want to remove and, in the next update, they will no longer appear (Important: when a machine is removed from the system, there is no possibility to recover it, you have to install the cpm again).
4th. Where can I modify or delete a project?
In the Settings app you can change the name of the project, activate/deactivate the notifications for consumables or technical alerts and, at the bottom, delete the project (Important: be sure to select the project you want to delete in the left column. If you select “All projects”, they will all disappear from your panel).
5th. Where can I change the consumables alert thresholds?
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.
6th. Where can I edit and write in the panel?
In all the apps where “***” appears in green in any column. When you click, you can write the new data (to modify it, you can rewrite over it; if you want to leave it empty again, rewrite “***”). A good example is the Inventory app: click on “Show/Hide columns” and select all the options you want to see in your panel. You will see that most of them have the “***” to edit and annotate what you want.
So much for the first set of answers. Nubeprint is currently developing an AI app that will allow you to chat in real time and ask all kinds of queries: the launch of NubAI is coming soon…..
Source: Nubeprint
4th. Where can I modify or delete a project?
In the Settings app you can change the name of the project, activate/deactivate the notifications for consumables or technical alerts and, at the bottom, delete the project (Important: be sure to select the project you want to delete in the left column. If you select “All projects”, they will all disappear from your panel).
5th. Where can I change the consumables alert thresholds?
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.
6th. Where can I edit and write in the panel?
In all the apps where “***” appears in green in any column. When you click, you can write the new data (to modify it, you can rewrite over it; if you want to leave it empty again, rewrite “***”). A good example is the Inventory app: click on “Show/Hide columns” and select all the options you want to see in your panel. You will see that most of them have the “***” to edit and annotate what you want.
So much for the first set of answers. Nubeprint is currently developing an AI app that will allow you to chat in real time and ask all kinds of queries: the launch of NubAI is coming soon…..
Source: Nubeprint
In the Status app. Check in “Show/Hide columns” that you have clicked on “Thresholds”. In this column you can change the thresholds for each particular machine, choosing % or days. If you click on “Activate threshold in days”, you will massively modify all the machines of the selected projects.